DS8-70 LED traffic light with blinking mode


It is used as an additional equipment in unregulated pedestrian crossings to attract the attention of drivers to improve road safety.

LED impulse display, especially at twilight and night time, allows you to identify a pedestrian crossing or intersection from a long distance and provide a safe driving regime in advance.

Structurally, the product is made in the body of the traffic light section Ø200mm.

As the light source, yellow  LEDs are used in traffic lights, which allows to reduce power consumption and provide a long service life.

The traffic light housing is made of a shock-resistant polymer material resistant to UV radiation.

The traffic light is manufactured in the UKhL climatic version, category 1 according to GOST R 52282-2004.


  • Reliability and convenience in operation;
  • Repairability;
  • Glass and housing made of impact-resistant material - polycarbonate;
  • It withstands the temperature difference without changing the lighting properties;
  • Flat housing;
  • Absence of phantom-effect;
  • Energy saving;
  • Long service life.

Type of light source 

Light emitting diodes


Diameter of light aperture, mm
Lighting parameters
According to GOST R 52282-2004
Case / Material
Flat / Polycarbonate
Consumed power in flashing mode, W
below 5
Rated frequency, Hz
Axial force of light, cd
above 250
Voltage, V
176 - 242
Degree of protection
Operating temperature range
from -40 °С to +60 °С
Working Hours
yellow signal flashing (flashing frequency 1Hz ± 10%)
Weight, kg
Dimensions, mm
Service life
10 years