MR-10


MR-10 geodesic satellite multi-frequency equipment


Function

The MR-8 geodesic satellite multi-frequency equipment is designed to perform engineering and geodetic surveys, cadastral and land management works, create plan-to-height groundings, create and update topographic maps and plans.


Specifications

Performance Characteristics
Number of channels
372
Shockproof and waterproof case
IP67
A wide range of communication modules
Ethernet; Wi-Fi; Bluetooth V2.1; radio modem
Data transmission frequency
1/10/20/50 Hz
Wide operating temperature range
from -30 °С to  +65 °С
Ergonomic design
Compactness and light weight due to the use of modern materials (magnesium alloy, monoblock case components from composite materials)
High degree of protection against mechanical damage
Received signals of satellites:
GLONASS: L1, L2
GPS: L1С/A, L2C, L1P, L2P
BEIDOU: В1, В2
Accuracy of measurements
Static accuracy
(plan) 3 mm + 1 mm/km
(height) 5 mm +1 mm/km
Accuracy in kinematics
(plan) 10 mm + 1 mm/km
(height) 20 mm +1 mm/km
Hardware features
Dimensions (WxDxH)
1,140 mm х 144 mm
Weight
1,37 kg
Operating temperature
from -30 °С to  +65 °С
Storage temperature
from -40 °С to  +80 °С
Humidity
Relative to 98%
Air tightness
IP67
Shock and vibration resistance
It was tested and complies with environmental protection standards
Electrical characteristics
DC Power Supply Voltage
7.4 V rechargeable battery
external source from 9 V to 18 V

Communication and data storage

  • Serial connection
  • USB v2.0: support for data download and high-speed connections
  • VHF radio modem with a 410-470 MHZ frequency range
  • Built-in GSM-modem
  • WiFi: 802.11 b, g, access point and client modes, WPA / WPA2 / WEP64 / WEP128 encryption
  • External devices for receiving / transmitting data - via serial port, USB port and Bluetooth
  • Built-in memory 4 GB + microSD slot, up to 32 GB


Scope of delivery

  • Rechargeable battery
  • Charger
  • An adapter for the charger  (for connection to power grids in the Russian Federation)
  • VHF antenna
  • GSM antenna
  • Tape-measure
  • Plate (for height measurement)
  • Cable for data reception and output
  • Transport case
  • Stand for fastening the smart antenna
  • Rotary adapter
  • Quick release adapter
  • Passport
  • StaticToRinex Software (on CD)
  • GGO Software (on CD)
  • Instruction manual (on CD).


Software

The smart antenna comes with built-in software. This software allows to carry out the measurement in the field. The software also includes post-processing software: "StaticToRinex" and "GEO Geomatics Office" (GGO), installed on a PC. This software provides for the smart antenna modules interfacing, setting up and controlling the workflow, storing and transmitting the measurement results, and post-processing of the measured data. Software protection against unintentional and deliberate changes corresponds to the "High" level in accordance with R 50.2.077-2014.