RS-2 geodesic satellite multi-frequency equipment


The RS-2 geodesic satellite multi-frequency equipment is designed to perform engineering and geodetic surveys, cadastral and land management works, create plan-to-height groundings, create and update topographic maps and plans.


Performance Characteristics
Number of channels
Shockproof and waterproof case
A wide range of communication modules
Ethernet; Wi-Fi; Bluetooth V2.1; radio modem
Data transmission frequency
1/10/20/50 Hz
Wide operating temperature range
from -35 °С to  +65 °С
Ergonomic design
Compactness and light weight due to the use of modern materials (magnesium alloy, monoblock case components from composite materials)
High degree of protection against mechanical damage
Received signals of satellites:
GPS: L1, L2
BEIDOU: В1, В2, В3
Accuracy of measurements
Static accuracy
(plan) 3 mm + 1 mm/km
(height) 5 mm +1 mm/km
Accuracy in kinematics
(plan) 10 mm + 1 mm/km
(height) 20 mm +1 mm/km
Hardware features
Dimensions (WxDxH)
222 mm х 164 mm х 79 mm
2.0 kg
Operating temperature
from -30 °С to  +65 °С
Storage temperature
from -40 °С to  +80 °С
Relative to 98%
Air tightness
Shock and vibration resistance
It was tested and complies with environmental protection standards
Electrical characteristics
DC Power Supply Voltage
external source from 9 V to 18 V

Communication and data storage

  • USB v2.0: support for data download and high-speed connections
  • VHF radio modem with a 410-470 MHZ frequency range
  • Built-in GSM-modem
  • WiFi: 802.11 b, g, access point and client modes, WPA / WPA2 / WEP64 / WEP128 encryption
  • External devices for receiving corrections - via serial port, USB Ethernet port and Bluetooth
  • Internal memory of 4 GB (SD card)

Scope of delivery

  • RS-2 station
  • A network adapter with a set of adapters (for connection to power grids in the Russian Federation)
  • USB/RS-232 cable
  • DB9-RS232 cable
  • Serial cable
  • Antenna cable (3m - on request)
  • BD type antenna
  • Packing (transport box)
  • Passport
  • StaticToRinex Software (on CD)
  • GGO Software (on CD)
  • Instruction manual (on CD).


The station comes with built-in software. This software allows to carry out the measurement in the field. The software also includes post-processing software: "StaticToRinex" and "GEO Geomatics Office" (GGO), installed on a PC. This software provides for the smart antenna modules interfacing, setting up and controlling the workflow, storing and transmitting the measurement results, and post-processing of the measured data. Software protection against unintentional and deliberate changes corresponds to the "High" level in accordance with R 50.2.077-2014.